Процесс разблокировки (Jailbreak+Активация 1.1.2)

Пока только на английском.  

1.1.2 Jailbreak (Updated)

**** NOTE: This method currently requires you be on 1.1.1 of the firmware.
If you are on 1.1.2    you must downgrade prior to being able to use

 1.1.2-jailbreak.zip  []  []  [] ****

Updates:
 - Activation/YouTube for iPhones
 - Added an automatic fix for SpringBoard crash problem on touches
 - PPC support
 - Some improvements to crossplatform compatibility

    
  
Step 1: Downgrade to 1.1.1 (if required)
 *** NOTE: This guide does not guarantee it will work 100%. Also errors 1015 is expected at   the end of the process. Continue reading to understand. ***

1. Download the 1.1.1 ipsw firmware file from Apple. If the downloaded file has the extension    ".zip", please remove it and modify it to end up with a filename ending in _Restore.ipsw
  
2. Reboot your iPhone holding the top (power) and home buttons BUT release the top button 10   seconds into it (right after the screen goes dark) and continue to hold the home button until    iTunes detects the phone in recovery mode. The iPhone screen will appear to be off, but start  iTunes if not started yet .
  
3. Restore your iPhone by pressing and holding the ‘Shift’ key on windows or ‘option’ key on Mac, then click ‘restore’ to select the 1.1.1 firmware file you downloaded earlier. The restore should  go through and errors at the end with error 1015. However you will notice that the iphone is in   DFU mode with the connect to itunes screen from 1.1.1.
  
4. In order to kick the phone out of that mode, start TouchFree by double-clicking "windows.bat"  on Windows or "jailbreak.jar" in OS X, then click the "Boot from Recovery" button.
  
----------------------------------------------------------------------------------------------------

Step 2a: Jailbreak 1.1.1 on Unactivated iPhone
 *** NOTE: If your phone has been activated through iTunes, you can proceed to step 2b. ***

1. enter *#307# press call, now use the back button on the top of your screen to remove *#307# ,   now enter 0 , press call, press answer, press hold, press decline. And you get to the contact  list. And thereafter every time you push the homebutton you just slide the "emergency call"  slide, then enter 0 , press call, press hold, press decline.

2. Push contacts, end call and you get called again, this time hit decline and you access one of menus with favorites, you can edit contacts, do a test ride on keyboard, take photos etc.

3. Now edit a new contact and type in "prefs://11" as web-address and "http://jailbreakme.com" as  an additional URL.

4. When you tap "prefs://11" you can now select your favorite WiFi gateway.

5. Now press the home button and move the slider to the dial-pad.

6. Now you can go back to the contact list by Dialing 0, push call, then answer, then contacts,  then hit the "http://jailbreakme.com" web address you typed in.

7. Scroll down to the bottom, click "Install AppSnapp". Safari will exit and you'll return to your springboard. Wait for the phone to reboot. You are now jailbroken. and are able to use Installer.app.
  
----------------------------------------------------------------------------------------------------

Step 2b: Jailbreaking on iPod Touch or iTunes Activated iPhone

1. Launch Safari

2. Visit http://jailbreakme.com, Scroll down to the bottom, click "Install AppSnapp". Safari will exit and you'll return to your springboard. Slide to unlock, you are now jailbroken. and are able to use Installer.app.
  
----------------------------------------------------------------------------------------------------

Step 3: Prepare your 1.1.1 device for the Update

1. Launch Installer.app

2. Scroll down to Tweaks (1.1.1)

3. Select OktoPrep

4. Click Install

----------------------------------------------------------------------------------------------------

Step 3b: Prevent SpringBoard crash on previous hacked iPod touches

If you have installed MobileMail on your iPod touch, there is a chance an update to 1.1.2 will render your device inoperable until a restore. This issue can be prevented by switching Auto-Check off.

- Go to General->Mail->Auto-Check. Set it to Manual.

If you forget to do this step and update, proceed with the jailbreak in step 5 (even though SpringBoard is unusable) and we will fix it for you.

----------------------------------------------------------------------------------------------------

Step 4: Update to 1.1.2

1. Connect your device to your computer

2. Launch iTunes

3. Choose your device

4. Click Update
  - If update shows 1.1.1 as being the newest version, you may download the 1.1.2 from an  Apple download server and shift-click (PC) or option-click (Mac) on "Check for update" and select the update you downloaded.

  - If update shows 1.1.2 as being the newest version, you may do update from iTunes

Attention!!! if update show 1.1.3 as being the newest version, do not update from iTunes directly, just choose file  with 1.1.2 firmware (downloaded before from Apple server or internet) then  shift-click (PC) or option-click (Mac) to select it.

  
  - DO NOT CLICK OR SHIFT-CLICK RESTORE: That will wipe the changes OktoPrep made.

5. Wait forever for your device to update

---------------------------------------------------------------------------

Step 5: Install iWorld from Installer, run it and choose your location.

Step 6: Use iSim